CTL55 COMPACT TRACK LOADER

Small in Stature, not on Power. Don't let the size of the all-new CTL55 deicieve you. With a machine width of only 58 inches, this machine is ideal for confined spaces where larger machines can't gain access.

  • Rated Op. Capacity - 50% Tipping Cap. (kg): 1779 lbs. (807)
  • Rated Op. Capacity- 35% Tipping Cap, (kg): 1246 lbs. (565)
  • Horsepower (kW): 51.2 hp (38.2) @2450 rpm
  • Maximum Lift Height (mm): 114.4" (2906)
  • Width - w/bucket (mm): 61.5 ” (1562)
  • Length w/ bucket (mm): 126.9” (3220)
STANDARD EQUIPMENT
  • All-Tach™ Attachment Mounting System
  • Back-up Alarm
  • Dual-Element Air Cleaner with Indicator
  • Dual, interior cab-mounted rear view mirrors
  • Electric Switch Auxiliary Hydraulic Control
  • Electrohydraulic Push Button - Lift Arm Float Feature
  • Elevated Planetary Final Drives with SAHR Disc Brakes
  • Engine Monitoring Alert System
  • Fuel, Engine, Temperature and Hourmeter Gauges
  • Full Suspension Seat - 6-way Adjustable
  • Glow Plug Starting
  • Hand Throttle and Foot Throttle
  • Horn
  • Hydraulic Self-Leveling
  • Independent Hydraulic Reservoir with Cooler
  • Interlock System for Lift, Tilt Cylinders, Auxiliary Hydraulic Functions and Drives
  • Joystick (Hydraulic Pilot-operated) "Hands-Only" controls
  • Mechanical Lift Cylinder Lock
  • Operator Restraint Bar with Armrests and Adjustable Seatbelt
  • Operational Lights - Two front, two rear halogen lights
  • ROPS/FOPS - Level I Approved Overhead Guard
  • Rubber Track Undercarriage System
  • Servo-Controlled Hydrostatic Drive
  • Swing-Out Radiator and Hydraulic Oil Cooler
  • Top and Rear Windows
  • Two-Speed Hydrostatic Drive System
  • Vandalism Lock Provisions - Engine Cover/Rear Door/Fuel Cap
  • Yanmar Liquid-Cooled Diesel Engine
OPTIONAL EQUIPMENT
  • Dual Hand Controls
  • Foot Throttle Kit
  • Generation II Heating and Air-Conditioning System with Sealed and Pressurized Cab


SPECIFICATIONS CTL55
ENGINE
Make Yanmar
Model 4TNV84T
Aspiration Turbo-charged
Displacement (L) / cylinder 121.7 cu.in. (2.0) / 4
Horsepower (kW) @ rpm 51.2 hp (38.2) @ 2800
Maximum Torque (Nm) @ rpm 120 ft.-lbs. (163) @ 1600
 
PERFORMANCE
Tipping Load - SAE J732 (kg) 3558 lbs. (1779)
Rated Operating Load
SAE J818 @ 50% Tipping Capacity (kg) 1779 lbs. (807)
SAE J818 @ 35% Tipping Capacity (kg) 1246 lbs. (565)
Breakout Force (kN)
- Bucket 4821 lbs. (21.4)
- Lift Arm 5042 lbs. (22.4)
 
ELECTRICAL
Battery/CCA 12-volt / 600
Alternator 40 amp
   
UNDERCARRIAGE  
Traction Pump/Traction Drive Piston / Planetary
Traction Braking Hydraulic
Drawbar Pull (kN) 6634 lbf (29.5)
Roller Type / Track Rollers - Each Side Steel / 3
Track Width 11.8" (300)
Track Contact Length 48.9" (1242)
Ground Pressure (kg/cm²) 4.7 psi (0.32)
Travel Speed
- Low 0-4.0 mph (0-6.5)
- High 0-5.8 mph (0-9.3)
   
HYDRAULIC SYSTEM  
Operating Pressure (bar) 2988 psi (206)
Auxiliary Hydraulic Flow - standard (L/min) 15.1 gpm (57.2)
   
CAPACITIES  
Fuel Tank (L) 15.1 gal. (57.9)
Hydraulic Reservoir (L) 7.7 gal. (29.1)
Engine Oil (L) 7.8 qts. (7.4)
Engine Coolant (L) 11.6 qts. (11)
   
DIMENSIONS AND WEIGHTS  
Operating Weight - Approximate (kg) 6129 lbs. (2780)
Maximum Lift Height to Bucket Pin (mm) 114.4" (2906)
Dump Height (mm) 89.5" (227)
Reach at Maximum Lift (mm) 23.1" (587)
Dump Angle 38.5°
Bucket Rollback at Ground Level (mm) 30°
Length - Without Bucket (mm) 101.7" (2583)
Length - With Bucket (mm) 126.9" (3220)
Ground Clearance (mm) 9.8" (249)
Angle of Departure 30°
Height - to top of ROPS (mm) 77.6" (1971)
Width - Without Bucket (mm) 57.9" (1471)
Width - With Bucket (mm) 61.5" (1562)
Rear Clearance Radius (mm) 57.9" (1471)
Front Clearance Radius - With Bucket (mm) 78.6" (1996)
 
BUCKET
Mounting Universal Quick-Attach
Capacity - SAE Heaped (m³) 11.7 cu. ft. (0.33)

back to track loaders


top of page


All Rights Reserved Copyright © 2007-
Site Content and Photos are Property of GEHL®
GEHL of Houston, an Authorized GEHL Dealer dba American Rent-All
Site Design & Graphics Created & Maintained by Boxtop Designs